Amazonite bracelet from the ONIRIQUE collection.
925 Silver clip.
Amazonite
CHOOSE A STRAP SIZE USING AN EXISTING STRAP
Select a bracelet that you are comfortable with. Lay it flat. Using a ruler, measure the length from the top of the clasp to the end of the bracelet. Configure your band with the nearest larger size.
CHOOSE THE SIZE OF A BRACELET BY TAKING YOUR MEASUREMENTS
To measure your wrist, you can:
Use a tape measure. Wrap it around the wrist on which you will wear your bracelet. Write the number indicated at the meeting point between the 0 and the ribbon. Choose a slightly larger variant if you like your bracelet not to fit too tightly.
Download and printthe wrist sizer. First check that the option "Scale to paper" is set to "no" in your print settings dialog box. The wrist sizer should be printed on a full A4 sheet. Follow the prompts, then select your wrist size.
HOW TO USE THE WRIST MEASURER?
Print and cut out the paper wrist sizer and follow the instructions below.
Make sure the numbers are on the outside of the meter. Once you have folded and cut out the scaler, insert the pointed end into the opening you cut on the line at the other end following the directions [Fold & Cut Here]. Insert your wrist and pull the pointed end until it fits comfortably on your wrist. Take care not to tear the meter so you don't have to repeat the procedure.
The number that is on the alignment of the edges of the opening indicates the size of your wrist.
You can also use a tailor's meter or, failing that, a cord. Wrap it around your wrist and measure the length with a ruler.
